0
<t
0
N
,.....
N
......
0
,.....
Vl
CX)
- The park assist cannot be used to park the
vehicle on tight bends.
Switching on and off
Applies to: vehicles with park assist
Fig. 116
Centre console: Button for park assist
±.
<t
a:
®
Fig. 117
Instrument cluster: Looking for a parking space.
@
parallel to the roadside,
@
perpendicular to the road
side
� To park parallel to the roadside, press the
I@ button once¢
Fig. 116.
Display
@
¢
Fig.
117
will appear on the infotainment sys
tem. Or:
� To park perpendicular to the roadside, press
the I@ button twice. Display
®
will appear.
� The LED in the I@ button is lit if the park assist
is switched on.
� To switch off the park assist, press the I@ but
ton. The LED in the I@ button will go out.
Parking aids
Looking for a parking space
Applies to: vehicles with park assist
Fig. 118
Instrument cluster: Prompt to keep driving for
wards (a parking space has been detected)
The section below describes how to park parallel
to the roadside. The procedure for parking per
pendicular to the roadside is similar.
Important: For the best parking result, you
should maintain a distance of approx. 1 metre to
the row of parked cars.
� Activate the turn signal for the side on which
you want to park.
� To park parallel to the roadside, drive forwards
at not more than
30
km/h. Or:
� To park perpendicular to the roadside, drive
forwards at not more than
20
km/h.
� The system will display a parking space when it
finds one¢
Fig. 118.
Please check that the
parking space is suitable for your vehicle.
If you exceed a speed of about
50
km/h, the park
assist will be switched off.
The park assist will display a parking space only if
it is Long and wide enough for the vehicle.
If you operate the left turn signal, the display
will show the left side of the road (and vice-ver
sa).
@
Note
- You can activate the park assist after you
have already driven past a parking space (as
Long as you were driving slowly enough). To
do so, press the I@ button and operate the
turn signal.
109
