0
<t
0
N
,.....
N
......
0
,.....
Vl
CX)
Note
- The On-board Handbook is not available in
all countries. Your Audi dealer will be able
to provide you with more detailed informa
tion.
- Switch off the ignition while you are instal
ling/updating the On-board Handbook.
- Please note that the On-board Handbook is
not a substitute for the printed Owner's
Manual.
Sound settings
You can adjust the sound and volume of the MMI
individually. The settings depend on the equip
ment fitted in your vehicle.
Fig. 180
Adjusting balance/fader
� Select: IM EN u I button >
Sound
> left control
button >
Entertainment.
Treble / Bass
You can adjust the settings for
Treble
and
Bass
by turning the rotary pushbutton. Any changes to
the settings only apply to the audio source cur
rently active. This allows you to set the sound for
each audio source separately.
Balance/fader (sound focus)
-
To set the left/right volume ratio:
Press the
rotary pushbutton. Turn the rotary pushbutton
clockwise or anti-clockwise to the desired posi
tion.
-
To set the front/rear volume ratio:
Press the
rotary pushbutton again. Turn the rotary push
button clockwise or anti-clockwise to the de
sired position.
-To set the volume ratio using the MMI touch
pad*:
Move your finger in the desired direction
on the MMI touch pad.
System settings
Sound effects*
Select and confirm a setting for
Focus:
- all: All the loudspeakers in the vehicle are ac
tive (evenly distributed sound focus).
-
front:
Only the loudspeakers in the front of the
vehicle are active.
Speed-dependent volume control
You can adjust the automatic volume adaption to
the interior noise level by turning the rotary
pushbutton.
Volume settings
Adjusting the volume
Using the ON/OFF button, you can adjust the vol
ume of an audio source or system message (e.g.
during a speech dialogue*) directly while it is be
ing played.
-
Volume up/down:
Turn the ON/OFF button
(D
¢
page 121, Fig. 124
clockwise or anti-clock
wise.
-
Mute/pause:
Briefly press the ON/OFF button.
Or:
Turn the ON/OFF button anti-clockwise un
til the mute symbol appears. Any active audio/
video source will then be paused.
-
Unmute/resume:
Briefly press the ON/OFF but
ton.
Or:
Turn the ON/OFF button clockwise.
{a))
Note
When you switch on the MMI system, very
high/very low volume levels are automatically
reduced/increased to a preset level.
Setting the system volume
� Select: IMENU! button>
Sound>
left control
button.
Telephone
Applies to: vehicles with telephone
Mute telephone:
Message and ring tones are si
lenced.
Ring tone:
Refer to
¢page 156, Ring tone and
volume settings.
..,.
217
