0
<t
0
N
,.....
N
......
0
,.....
Vl
CX)
- Do not drive with the backrests of the front
seats reclined too far as otherwise the seat
belt and airbag could fail to restrain the
wearer properly in an accident, possibly
leading to injury.
Bucket seat adjustment
Applies to: vehicles with bucket seats
Fig. 54
Bucket seat: Adjuster controls
M
co
Ll)
0
co
CD
CD
-
Seat forwards/backwards: Lift the lever and
move the seat.
@
- Seat height: Pull/press the lever.
A
WARNING
- Never adjust the seats when the vehicle is
moving - this could lead to an accident.
- Be careful when adjusting the seat height.
Careless or uncontrolled use of the seat ad
justment can cause injuries.
- For safety reasons the seat backrests must
always be locked while driving - risk of in
jury!
-Never run a seat belt through one of the
openings in the backrest. This could cause
the backrest to tip forwards while the vehi
cle is moving - accident risk!
Multi-function button
Applies to: vehicles with multi-function button
The multi-function button can be used to adjust
the side cushions.
� If you turn the multi-function button
CD
¢
page 54, Fig. 53
to the left or right, the later
al support on the seat will be increased/re-
Seats and storage
duced by adjusting the side cushions on the
backrest.
@
Note
The air in the side cushions* is released when
you open the driver's door. This makes it eas
ier to get in and out of the vehicle. The side
cushions are re-inflated as soon as you drive
the vehicle.
Centre armrest
Applies to vehicles with centre armrest
Fig. 55
Armrest between driver's seat and passenger's
seat
� To adjust the angle, lift the armrest¢
Fig. 55
until it engages in the desired position.
� To lower the armrest again, lift the armrest
slightly from the top click stop and then fold it
back down. Then raise the armrest to the de
sired position if necessary.
You can move the armrest backwards or for
wards.
There is a storage compartment underneath the
armrest.
55
