Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
57 – Front Doors, Central Locking System
1
Description and Operation
⇒ “1.1 Front Door“, page 73
⇒ “1.2 Central Locking“, page 79
1.1
Front Door
⇒ “1.1.1 Door, Adjusting“, page 73
⇒ “1.1.2 Door Handle Assembly Overview“, page 76
⇒ “1.1.3 Door Lock Assembly Overview“, page 78
1.1.1
Door, Adjusting
Special tools and workshop equipment required
♦ Adjusting gauge -3371-
♦ Template -T40038/7-
Adjusting with Template -T40038/7-
– The position of the door in relation to the sides, the height and
the rear window can be checked using the template.
– The distance to the side window can be checked using the
grading for dimension -a-.
– The recess of the door to the fender or the side panel to the
door can be checked with gradings for dimensions -b- and
-c-.
– The template must be positioned at a distance of -a- = 100 mm
from the rear edge of the door window or at the front as an
extension from the windshield upper edge -arrow- to the roof
trim molding.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Description and Operation
73
