Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Position complete surface of nozzle -2- onto window.
• Application direction -arrow- for adhesive bead -1-.
– Apply adhesive sealing material all around between adhesive
stopper profiles.
– With an undamaged removed window, apply adhesive to re‐
maining bead.
– Insert the rear window into window cut-out using double suc‐
tion cups.
Caution
The window must be installed within 15 minutes or the adhe‐
sive sealing material will not adhere properly.
– Center window along sides.
– Note distance to upper lid edge = 2 mm.
– Observe minimum curing time
2.2
Bolted Windows
⇒ “2.2.1 Front Door Window“, page 212
⇒ “2.2.2 Front Inner Door Plate Cover“, page 214
⇒ “2.2.3 Rear Inner Door Plate Cover“, page 215
2.2.1
Front Door Window
Special tools and workshop equipment required
♦ Suction lifter -V.A.G 1344-
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
212
Rep. Gr.64 - Glass, Window Regulators
