39
4.2.2
Command
Picture 41 - Command
The submenu “Command” shows the following parts (Picture 41):
•
Restart Controller (1): by pressing the Enter key, the machine executes a complete reset (it switches off and
then re-switches on).
•
Reset Statistics (2): by pressing the Enter key, the machine cancels all the functioning historical data stored up
to now, excluded the last 24 hours of functioning.
•
Keyboard/Led Test (3): by pressing the Enter key, the machine executes a test of all the led lights available on
the interface board and on the display (the display is switched on but does not visualize any information). In
order to finish the test press the Esc key.
4.2.3
Inverter
Picture 42 - Inverter
The submenu “Inverter” shows the following parts (Picture 42):
•
Inverter Start/Stop (1): by pressing the Enter key, you access the screen where it is possible to switch off (press
the Enter key on Stop) or switch on the inverter (press the Enter key on Start) (Picture 43). The status of the
inverter is visualized in the first line at the top between the symbols “<>”.
Picture 43 - Start and Stop Inverter: inverter switched on (INVERTER ON)
1
3
2
1
3
5
2
4
6
Inverter switched on
