52
4.2.5
WiFi
The submenu “WiFi” shows the following parts (Picture 83):
Picture 83 - WiFi: OFF
-
Start: with this command the WiFi card is enabled to communicate the data of the storage system. After
having given the command, the screen appears like the one in Picture 84 (the top writing is “WIFI ON”).
-
Stop: with this command the WiFi card is disabled to communicate the data of the storage system. After
having given the command, the screen appears like the one in Picture 83 (the top writing is “WIFI OFF”).
Picture 84 - WiFi: ON
-
Info: with this command you access the screen that contains information regarding the card and the WiFi
connection.
-
Reset: with this command you reset the WiFi card and you cancel the data regarding the WiFi network
previously configured.
-
Configure: with this command you enable the WiFi card to execute the procedure of configuration
described later.
4.2.5.1
Configuration for the communication of the WiFi card
The submenu “WiFi” that you have entered in the previous paragraph appears like in Picture 83.
In order to configure the WiFi card, proceed as follows:
1.
Place the cursor next to the writing “Start”; press the key “ENTER” to enable the WiFi communication.
The first writing of the menu WiFi changes from “WIFI OFF” to “WIFI ON”, as shown in Picture 84.
2.
By pressing the keys “arrow up” or “arrow down” place the cursor next to the writing “Configure”, then
press the key “ENTER”.
