44
- Gen Diesel (2): the function “Gen Diesel” enables the function of charge of the batteries through the terminals of
the inverter that depend on the electrical line labelled “Grid Line”. It is necessary to parameterize a maximum
power from the grid (parameter “Max Pot.GEN”) and an entry that enables the function (entry in tension = active
function of battery charge from electrical grid). It is recommended if on the electrical installation it is available a
generating set with a thermal engine that can charge the batteries in case of need (for ex. a mountain hut
without fixed electrical grid). In order to enable it:
•
Set up in “Enable” the function “Gen Diesel” (Picture 59)
•
Set up in the parameter “Max Pot.Gen” (Picture 60) the maximum power permissible during charge from
the grid
•
Set up in the parameter “Input GD” (Picture 61 and 62) the digital entry available on the control card of
the machine, that enables (D.I. = 1) or disables (D.I. = 0) the function “GEN DIESEL”. The combination
between the terminals to be connected an the chosen entry is set by the following table:
INPUT GD
TERMINALS CONNECTOR DIGITAL
ENTRIES OF THE CONTROL CARD OF
THE MACHINE
1
9 / 1
2
9 / 2
3
9 / 3
4
9 / 4
Picture 58 - Gen Diesel: Disabled
Picture 59 - Gen Diesel: Enabled
Picture 60 - Gen Diesel: setting up of the parameter “Max Pot.Gen”
Gen Diesel disabled
Enable: it enables the
function
Disable: it disables the
function
Gen Diesel enabled
Max Pot.GEN: max. permissible
power from the electrical grid to
charge the batteries
