49
4.2.4
Battery
The submenu “Battery” shows the following parts (Picture 74):
Picture 74 – Menu Battery
- Set Ah Battery (1): with this command it is possible to force the Soc of the battery to a percentage value that it is
not the one really calculated by the manager card of the storage system (Picture 75).
Picture 75 - Set Ah Battery
- Reload Ah Battery (2): with this command it is required to the manager card of the storage system to recharge;
as data of “Ah caricati”, the last reading executed (every 5 minutes a reading is done), (Picture 76).
Picture 76 - Reload Ah Battery
- Calc. Ah Battery (3): with this command it is required to the manager card of the storage system to calculate the
value of Ah charged in the battery. The calculation can be done in 2 different ways:
•
If the parameter “Soc Ah/Volt/BMS” (Picture 79) is set up at the value “Ah” or “Volt”, the card realizes a
calculation according to the tension in which the battery is, that as a result creates a value of Ah stored in
this latter.
•
If the parameter “Soc Ah/Volt/BMS”) is set up at the value “BMS”, the value of Ah charged in the battery
is read by the Battery Management System.
1
3
5
2
4
6
