ATLET A-Ergo, Service Manual

Page: 183 / 250

ATLET SERVICE MANUAL A-ERGO ATLET SERVICE MANUAL A-ERGO
This function is tested by switching off the key switch, holding the speed controller in This function is tested by switching off the key switch, holding the speed controller in
actuated position, and switching the key switch on again. The
actuated position, and switching the key switch on again. The truck should then not move truck should then not move
before the speed controller has been before the speed controller has been in neutral. in neutral.
E Elle ec cttrriic ca al s l sy ys stte em / m / G Ge en ne erra al / l / S Sa affe etty c y ch he ec ck k 1 10 0..5 5
T Testing of the esting of the motor circuit is motor circuit is not possible since it i not possible since it is a three-phase motor, and neither is s a three-phase motor, and neither is
it necessary. it necessary.
There are different systems that reduce the top speed of the truck and the lifting height There are different systems that reduce the top speed of the truck and the lifting height
and load of the forks. These systems are tested by lifting the
and load of the forks. These systems are tested by lifting the forks over the switching forks over the switching
height and loading them over the set weight. A tortoise should then be indicated on the height and loading them over the set weight. A tortoise should then be indicated on the
MDI display, see
MDI display, see "Multi Function Display Indicator (MDI)" on "Multi Function Display Indicator (MDI)" on page 10.13 page 10.13..
https://www.besttruckmanuals.com/