Atest Gaz Sigma Control L, User Manual

Page: 21 / 52

www.atestgaz.pl
Detector statuses can be as follows:
Icon Descrip!on
The detector operates in monitoring mode – it takes measurement and its indica ons are
reliable.
The detector operates in special mode. Its indica ons are taken into account in the Control
Unit output control.
Detector fault or no communica on with the detector. Its indica ons are not taken into
account in the Control Unit output control (except for relay in fault status).
The detector operates in lock mode – its indica on before the lock is latched.
Non-cri cal fault – detector malfunc on measurement accuracy loss (eg exceeded me to
periodic calibra on).
Table 8: Detector statuses
Push-bu+on func ons:
In the system view push bu+ons can adopt the following func ons:
Icon Descrip!on
Temporary internal buzzer deac va on.
Temporary acous c indicator deac va on.
Visual indicator backup disabled
System passes to detailed view (see sec on 5.6 and 5.7).
Pressing two neighboring push bu+ons enables user’s interface test (see sec on 5.4).
Table 9: Push bu:on func!ons
p. 21|37
User's Manual: POD-026-ENG R11