Atest Gaz Sigma Control L, User Manual

Page: 19 / 52

www.atestgaz.pl
System status:
Informa on about system status is displayed interchangeably with informa on about date and
me (or clock not being set) – this allows to verify the seNng of this parameters in control unit.
This sec on shows a text collec ve descrip on of the system. Possible messages include:
Message Descrip!on
OPERATIONAL This message is displayed, when all system components covered by self-diagnos cs operate
correctly.
FAULT At least one component covered by self-diagnos cs is faulty (Control Unit or a detector).
EXTER.ALARM Dual Input (DI) has been set up as EXTER. ALARM and has been triggered.
EXTER.FAULT Dual Input (DI) has been set up as EXTER. FAULT and has been triggered.
Table 6: Collec!ve text system descrip!on
p. 19|37
User's Manual: POD-026-ENG R11
Figure 14: System view screen – system with up to 10 detectors
System status
Detector status
on
func ons
Beacon status
Figure 15: System view screen – system with 10 to 20 detectors
Beacon status
System status
Detector status
on
func ons