AT&T TL96276 Complete User'S Manual Download

Page: 148 / 180

141

Appendix

Screen messages

Quiet mode

is off

QUIET

mode is turned off.

Rec mem full

The system recording time is full.

Rec mem low

The system recording time is low.

Registering...

Please wait

The handset is registering to the telephone base.

Registration

slots are full

The telephone base has the maximum of 12 handsets
registered to it.

Registration

failed

The handset registration is not successful.

Remote voice

control ended.

The remote voice control operation is ended.

Ringer off

The ringer is turned off.

Ringer muted

The ringer is off temporarily while the device is ringing.

Saved

An entry has been successfully saved in the directory.

Setting up

Answering

system

The telephone is playing voice guide.

To register,

see user manual

Screen display before handset registration.

Unable to call.

Try again.

You try to join a call when there are already four handsets on
that call.

You try to make an outside call when another device is
transferring a call with the intercom feature.

XX Missed calls

There are new calls in the caller ID log.

XX New messages

There are new messages in the answering system.

Summary of Contents for TL96276





















































































































































































Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands

AT&T TL96276, Complete User'S Manual

Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands