AT&T TL96276 Complete User'S Manual Download Page 141

Page: 141 / 180

134

Appendix

Alert tones

Handset alert tones

One short beep

Tone of each key press, if key tone is turned on.

One long beep

Indication to begin recording a message, memo or announcement.

Two short beeps

You are pressing

CID

DIR

when the volume is already at its

highest or lowest setting.

-OR-

You have reached the end of the caller ID log.

-OR-

Call waiting tone.

-OR-

Error tone.

Confirmation tone
(Three rising tones)

The telephone has completed the command successfully.

Four beeps

The other party has ended your intercom call.

-OR-

Out of range while the handset is on a call.

Four short beeps

Low battery warning.

Four rising tones

Your Android cell phone has received mobile notifications.

Summary of Contents for TL96276





















































































































































































Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands

AT&T TL96276, Complete User'S Manual

Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands