background image

29

Bluetooth

Bluetooth setup

Your cell phone may require you to press a key to confirm the directory 
download.
Your cell phone may require a passcode. In this case the screen displays 

Check cellular. ENTER PASSCODE.

. Enter the cell phone passcode into 

the telephone base and press 

SET

 to save.

If the selected device’s directory has already been downloaded to 

TL96276/TL96456

 before, the handset displays the date of the last 

download from your cell phone. The directory stored on the  

TL96276/TL96456

 for that cell phone will be erased and replaced with 

the current cell phone directory. If you have edited the downloaded 
entries, those changes will be lost. Press 

NEXT

 to start the download, the 

screen displays 

Erasing directory...

.

If you already have four downloaded directories, the handset displays 

Memory is full. Replace existing directory?

. Press 

YES

 if you want to 

replace an existing directory. Highlight the cell phone directory to be 
replaced and press 

SELECT

. The screen displays 

Replace Cell Phone X 

directory? 

(

Cell Phone

 

X

 represents the device name of your cell phone). 

Press 

YES

 to confirm.

When the downloading process completes, the telephone 
base displays 

Download ended XXXX entries saved. 

(

XXXX

 represents the total number of the downloaded 

entries). You hear a confirmation tone. Press 

OK

 

to return 

to the 

Bluetooth

 menu.

 NOTES: 

With certain cell phones, downloading from the SIM card is not supported. If this is the case, try 
transferring the contacts from your SIM card to your cell phone memory first, then download 
from your cell phone memory. For more information on how to transfer contacts from your SIM 
card to your cell phone memory, see the user’s manual of your cell phone.
If 

Phone memory

 is chosen but with no entries saved, the handset displays 

No entries found. 

Download from SIM only?

. Press 

YES

 to confirm. If 

SIM card only

 is chosen but with no entries 

saved, the handset displays 

No entries found. Download from Phone only?

. Press 

YES

 to 

confirm. If 

Phone and SIM

 are chosen but with no entries saved in either or both directories, 

the handset display 

No entries found. Download from Phone only?

. Press 

YES

 to confirm.

When downloading the directory from your Bluetooth enabled cell phone, some data may not 
transfer. For example, if you have home, mobile and work numbers for a particular contact, the 
three categories may not transfer to your 

TL96276/TL96456

.

5.

Download ended

XXXX

entries saved.

BACK       OK

Summary of Contents for TL96276





















































































































































































Reviews: