AT&T TL96276 Complete User'S Manual Download Page 146

Page: 146 / 180

139

Appendix

Incoming call

There is a call coming in.

Intercom

The device is on an intercom call.

Intercom ended

The intercom call has just ended.

Low battery

The battery needs to be charged.

Microphone ON

Mute is off so the other party can hear your voice.

Muted

The microphone is off. The other party cannot hear you, but
you can hear the other party.

New voicemail

There are new voicemail messages from your telephone
service provider.

No answer.
Try again.

You tried to make an intercom call, but the handset you are
calling is busy, out of range, or has no power.

No battery

The battery is not properly installed and the handset is in the
telephone base or charger.

No bluetooth

device is
ready for

connection.

There is no Bluetooth device paired to the telephone system
when you press

CELL 1

CELL 2

on the hanset or

telephone base.

No caller info

The caller information is not available.

No entries

found.

Download from

SIM only ?

There are no entries found when you download a cell phone
directory from the cell memory.

No entries

found.

Download from

Phone only ?

There are no entries found when you download a cell phone
directory from your SIM card.

There are no entries found in either the cell or SIM card when
you download a cell phone directory from both memories.

No home line

There is no telephone line connected.

No Incoming PTT

The incoming PTT function of the handset is turned off. The
handset will not receive PTT calls.

No messages

There are no messages recorded on the answering system.

No PTT call

The incoming PTT function of the telephone base is turned off.
The telephone base will not receive PTT calls.

Screen messages

Summary of Contents for TL96276





















































































































































































Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands

AT&T TL96276, Complete User'S Manual

Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands