AT&T TL96276 Complete User'S Manual Download Page 131

Page: 131 / 180

124

Answering system

Message playback

When messages are playing on a handset:

Press

/SPEAKER

to play the messages through the handset earpiece.

Press

/SPEAKER

again to return to playing messages through the

speakerphone.
Press

CID

/VOLUME/

DIR

to adjust the message playback volume.

Press

SKIP

to skip to the next message.

Press

REPEAT

to repeat the message currently playing. Press

REPEAT

twice

to listen to the previous message.
Press

MUTE

/DELETE

to delete the current message.

Press

to pause the playback and show the caller ID information.

Press

HOME/

FLASH

CALL

/SPEAKER

to use the home line, or

press

CELL 1

CELL 2

to use the cell line to call back the caller. If

necessary, press

(pound key) or

to show different dialing options.

Press

OFF/

CANCEL

BACK

to restart the playback. If you do not call

back within 10 seconds, message playback restarts.

Press

HOME/

FLASH

CELL 1

CELL 2

to pause the message playback.

The handset displays

Call back?

with the caller ID information. Press

CALL

to call back the caller, or

BACK

to restart the message playback. If the dialing

format used is not correct, then use the option, as mentioned above, to
choose the correct dialing format before calling back the caller.
Press

OFF/

CANCEL

to stop the playback.

NOTES:

When the answering system has less than three minutes of recording time left, it announces,

“Less than three minutes to record.”

and the handset displays

Rec mem low

When the telephone is not in use, if the handset or telephone base displays

Rec mem full

, the

memory is full. Delete some messages to make room for more.

•

•
•
•

•
•

•

Summary of Contents for TL96276





















































































































































































Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands

AT&T TL96276, Complete User'S Manual

Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands