manualshive.com logo in svg

AT&T TL96276, Complete User'S Manual

Share
Download
AT&T TL96276 Complete User'S Manual Download Page 24

17

Introducing Bluetooth

Your new AT&T 

TL96276/TL96456

 telephone system with Bluetooth wireless 

technology has the following features:

Pair up to four Bluetooth enabled devices (cell phones or headsets) with the 
telephone base.
Connect a maximum of two Bluetooth enabled devices to make and receive 
cell calls. Both cell phones can be active on a call at a time.
Connect a Bluetooth enabled headset for making and receiving home calls.
Conference any combination of cell and home call. 
Make and receive calls using your cell phone service with your telephone 
base or system handsets.
Download phonebook entries from your cell phone.
Ringtone share feature allows you to set your telephone to play your 
iPhone

®

 (iOS 4.1 or later) ringtone.

IMPORTANT INFORMATION

After plugging in the telephone base, wait at least 20 seconds before 
connecting a Bluetooth device. The screen shows 

Bluetooth system busy

  

if you try to connect too soon.
Refer to the user’s manual of your Bluetooth enabled cell phone or headset 
for more information about how that device uses Bluetooth connectivity.
Bluetooth wireless technology operates within a short range (up to 30 feet) 
from the telephone base. Keep connected cell phones and headsets within 
this range.
If your cell phone has poor reception in your home, the 

TL96276/TL96456

 

cannot improve the reception. However, if there is a location in your house 
with better reception, you can leave your cell phone at that location while 
you use the 

TL96276/TL96456

 cell line. For optimal performance, the cell 

phone must be within 15 feet of the telephone base.

•

•

•
•
•

•
•

•

•

•

•

iPhone® is a registered trademark of Apple, Inc.

17

Bluetooth

Summary of Contents for TL96276





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands