AT&T TL96276 Complete User'S Manual Download

Page: 8 / 180

Installation

Install the telephone base close to a telephone jack and a power outlet not

controlled by a wall switch. The telephone base can be placed on a flat surface

or vertically mounted on the wall (page 15). For optimum range and better

reception, place the telephone base in a central and open location.
You may hear interference if your cellular phone is too close to the telephone

base during a

CELLULAR

call. Make sure that your Bluetooth enabled cellular

phone is within 15 feet of the telephone base in order to maintain a clear and

consistent connection between your Bluetooth cell phone, telephone base and

cell tower.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)

through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack (page 9). The filter prevents

noise and caller ID problems caused by DSL interference. Please contact your

DSL service provider for more information about DSL filters.
Your product may be shipped with a protective sticker covering the handset or

telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com

or call

1 (800) 222-3111

. In Canada, dial

1 (866) 288-4268

Avoid placing the telephone base and charger too close to:

Communication devices such as television sets, VCRs, or other

cordless telephones.
Excessive heat sources.
Noise sources such as a window with traffic outside, motors, microwave

ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock, such as on top of washing machine or
workbench.

•

•
•

•
•
•
•

You must install and charge
the battery before using the
cordless handset.

See pages 11-13 for easy
instructions.

Getting started

Summary of Contents for TL96276





















































































































































































Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands

AT&T TL96276, Complete User'S Manual

Search results

Summary of Contents for TL96276

Reviews:

Related manuals for TL96276

Brands by name

Popular brands