110
Answering system
Answering system settings
To record a new outgoing announcement:
Press
MENU
in idle mode.
Press
CID
or
DIR
to scroll to
Answering sys
, then press
SELECT
.
Press
SELECT
to select
Announcement
.
Press
SELECT
again to select
Record annc
. The system
announces,
“Record after the tone. Press STOP when you
are done.”
After the tone, speak towards the microphone of the handset
or the telephone base. Press
STOP
to end recording.
The newly recorded announcement automatically plays.
Press
STOP
to stop the playback at any time, or
RECORD
to record again, if
desired.
To listen to the recorded announcement again, wait after playback has completed,
then scroll to
Play annc
and press
SELECT
.
NOTES:
Your announcement can be up to 90 seconds in length.
Announcements shorter than two seconds are not recorded.
To delete or reset your outgoing announcement:
Press
MENU
in idle mode.
Press
CID
or
DIR
to scroll to
Answering sys
, then press
SELECT
.
Press
SELECT
again to select
Announcement
.
Press
CID
or
DIR
to scroll to
Reset annc
and press
SELECT
. The screen
prompts
Reset to default annc?
. Press
YES
to confirm. The system
announces,
“Announcement deleted.”
and the screen shows
Annc. reset to
default
before returning to the previous menu.
-OR-
Press
CID
or
DIR
to scroll to
Play annc
and play the announcement.
While the announcement is playing, press
MUTE
/DELETE
on a handset or
X/DELETE
on the telephone base to reset the announcement. The system
announces “
Announcement deleted.”
and the screen shows
Annc. Deleted
before returning to the previous menu.
When your announcement is reset, the system answers calls with the default
announcement, as described on page 109. You cannot delete the default
announcement.
1.
2.
3.
4.
5.
6.
•
•
1.
2.
3.
4.
Recording
announcement...
STOP
Playing
announcement...
RECORD STOP
