Asus X99-M WS Manual Download Page 29

Page: 29 / 176

ASUS X99-M WS

1-15

Chapter 1

EPU switch

Enable this switch to automatically detect the current PC loadings and intelligently

moderate the power consumption.

Enable this switch when the system is powered off.

•

The EPU LED (O2LED3) near the EPU switch lights up when you enable the EPU

switch. Refer to section

1.2.8 Onboard LEDs

for the exact location of the EPU LED.

•

If you enable this switch under Windows

OS environment, the EPU function will be

activated after the next system bootup.

•

You may change the EPU settings in BIOS setup program and enable the EPU

function at the same time. However, the system will use the last setting you have

made.

Summary of Contents for X99-M WS

















































































































































































Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands

Asus X99-M WS, Manual

Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands