Asus X99-M WS Manual Download Page 42

Page: 42 / 176

1-28

Chapter 1: Product introduction

Chapter 1

DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then

install the Q-Connector (USB) to the USB connector onboard if your chassis supports front

panel USB ports.

The USB 2.0 module is purchased separately.

USB 2.0 connectors (10-1 pin USB1112; USB1314)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of

these connectors, then install the module to a slot opening at the back of the system

chassis. These USB connectors comply with USB 2.0 specification that supports up to

48 Mb/s connection speed.

Summary of Contents for X99-M WS

















































































































































































Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands

Asus X99-M WS, Manual

Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands