Asus X99-M WS Manual Download Page 41

Page: 41 / 176

ASUS X99-M WS

1-27

Chapter 1

USB 3.0 connectors (20-1 pin USB3_56)

These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front

or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of

USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster charging time for

USB-chargeable devices, optimized power efficiency, and backward compatibility with

USB 2.0.

The USB 3.0 module is purchased separately.

•

Ensure to install the related driver to fully use the USB 3.0 ports under Windows

•

The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the

operating system’s setting.

•

These USB 3.0 ports support native UASP transfer standard in Windows

8 /

Windows

8.1 and Turbo Mode when using USB 3.0 Boost feature.

Summary of Contents for X99-M WS

















































































































































































Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands

Asus X99-M WS, Manual

Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands