Asus X99-M WS Manual Download Page 103

Page: 103 / 176

ASUS X99-M WS

3-37

Chapter 3

SATA Controller 1 Mode Selection [AHCI]

This item allows you to set the SATA configuration.
[Disabled]

Disables the SATA function.

[IDE Mode]

Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[AHCI Mode]

Set to [AHCI Mode] when you want the SATA hard disk drives to use the

AHCI (Advanced Host Controller Interface). The AHCI allows the onboard

storage driver to enable advanced Serial ATA features that increases

storage performance on random workloads by allowing the drive to

internally optimize the order of commands.

[RAID Mode]

Set to [RAID Mode] when you want to create a RAID configuration from the

SATA hard disk drives.

The following item appears only when you set the SATA Mode Selection to

[IDE]

SATA6G_1-4 (Gray)

These items display all connected devices to SATA6G ports. If some ports are not

used, these items show

[Not Installed]

SATA Controller 2 Mode Selection [AHCI]

This item allows you to set the SATA configuration.
[Disabled]

Disables the SATA function.

[IDE Mode]

Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[AHCI Mode]

Set to [AHCI Mode] when you want the SATA hard disk drives to use the

AHCI (Advanced Host Controller Interface). The AHCI allows the onboard

storage driver to enable advanced Serial ATA features that increases

storage performance on random workloads by allowing the drive to

internally optimize the order of commands.

Due to Intel

chipset specification, the SATA ports from SATA controller 2 does not support

Intel

Rapid Storage Technology including RAID configuration.

The following item appears only when you set the SATA Mode Selection to

[IDE]

SATA6G_7-10 (Black)

These items display all connected devices to SATA6G ports. If some ports are not

used, these items show

[Not Installed]

Support Aggressive Link Power Management [Disabled]

This item is designed for LPM (link power management) support with a better energy saving

conditions. When disabled, the hot plug function of SATA ports are disabled.
Configuration options: [Disabled] [Enabled]

Hot Plug [Disabled] (SATA6G_1-4 (Gray) / SATA6G_7-10 (Black))

These items allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]

Summary of Contents for X99-M WS

















































































































































































Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands

Asus X99-M WS, Manual

Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands