AstroNova QuickLabel QL800, User Manual, Page: 71 / 172

QL-800 Maintenance Utility
QL-800 User Guide 71
4 Enter a vertical baseline value.
In the following illustration, a label is exiting the printer. Note the positive and negative
adjustment directions.
5 To save the vertical baseline value, choose Save to Printer .
Setting the Horizontal Baseline
If you send the same job to two or more QL-800 printers and notice that the image prints in
different locations, you can move the horizontal baseline of a printer.
Note: Adjusting the baseline is needed only for synchronizing the output of two or more
printers. Baselines are adjusted at the factory and should be close from printer to printer. If you
are using one QL-800, baseline adjustment is not necessary.
1 Launch the QL-800 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel QL-800 >
QL-800 Maintenance Utility . A language and printer prompt will open.
Select a display language and the QL-800 printer you want to connect to. Choose OK .
2 Choose the Print Settings tab.
3 To read the horizontal baseline value from the printer and set the Horizontal Baseline
control accordingly, choose Read From Printer .