External Unwinder
QL-800 User Guide
155
Unwinding Labels with the External Unwinder
The unwinder automatically unwinds media into the QL-800 for printing. This option is used
when feeding rolls over eight inches in diameter.
Note:
Do not turn the unwinder mandrel by hand to unwind the media. Turning the mandrel by
hand can result in unwinder damage.
1
Enable
External Unwind Mode
in the
Print Settings
tab of the QL-800 Maintenance
Utility.
See “Setting up External Unwind Mode” on page 73.
2
Ensure the power switch [3] on the unwinder is in the off position.
3
Turn the thumb screw [6] counterclockwise to loosen and remove the removable roll
support arm [7].
4
Turn the unwinder mandrel adjustment knob [4] counterclockwise to loosen the mandrel.
5
Remove the outer flange [2] from the mandrel.
6
Load a roll of labels on the mandrel. The media should unwind over the top of the roll toward
the printer. Ensure the side of the roll contacts the inner flange [1].
7
Reinstall the outer flange [2] and then turn the mandrel adjustment knob [4] clockwise to
tighten the mandrel.
[1]
[2]
[3]
[4]
[7]
[5]
[6]
Summary of Contents for QuickLabel QL800
