___________________________________________________________________________________
‐
31
‐
12‐1015 rev‐B
User’s Manual Version 14.12
No Load Test
At 3,000 rpm:
Av Volts: 14.2V
Max. <15.0V: 14.6V
Min. >13.3V: 13.8V
Press [Enter] for
results.
Follow the instructions, make sure that all loads (lights, air-condition, etc)
are OFF. Rev the engine up to
3,000 ~ 3,500 RPM
by referring to the
dashboard meter, then press key and maintain the engine speed for
about 10 seconds and release the pedal. The maximum and minimum
voltages values will be captured.
After that press
key again and it show as below (Fig. 49)
With the captured readings, analysis can done by referring to the limits as
indicated that
MAX voltage should not exceed 15.0V
(max. voltage at
3,000 RPM) and
MIN voltage should be more than 13.3V
(min voltage
during idling speed).
Fig.49
Fig. 48
Average
charging Volts
Normal charging
Volts limit.
Captured Volts
readings
No Load Test
Make sure all
electrical loads are
turn OFF. Rev the
engine to 3,000 rpm.
Press [Enter].
Hold on to this 3,000
rpm for 10 seconds and
release the pedal.
