___________________________________________________________________________________
‐
15
‐
12‐1015 rev‐B
User’s Manual Version 14.12
Testing on stand-alone batteries
Clean the battery posts with a wire brush prior testing. For side post batteries,
install stud adaptors. Do not use steel bolts for better results.
1. Attach the Analyser clips onto the battery terminal posts [Red to (+) and
Black to (-)] the unit will power up and lights up the LCD display screen as
shown (Fig.15).
2. It will run through a self-test and when completed it displays the Main Menu
as shown: (Fig. 16)
Here, it will let you select your choice from the Menu:
New
Test
This function will allow you to key in the particulars (e.g. license plate
numbers, names, etc) that you need before commencing the test. The
particulars will be included in the test results when printed out from its
printer. It also allows the test Results to be saved in its memory which can
be called up for later viewing and printout.
Fig.15
Fig.16
Select Menu
23/12/2014 16.48
New: Test
Continue Testing
Stored Results
Setup Menu
