___________________________________________________________________________________
‐
3
‐
12‐1015 rev‐B
User’s Manual Version 14.12
1.0 Introduction
1.1 12-1015 REV-B (Battery Electrical System Analyser):
The utilization of the latest advanced technologies in battery testing had enabled
this Analyser to test batteries in any conditions. Testing procedures are made
simple with quick, easy and repeatable results. Test Results can be printed directly
on its’ built in printer. It can store up to 250 test Results in its memory for future
references and they can also be transferred and saved in the PC for records
management via an USB port link.
The programs consist of:
1. Battery Test:
Analyses the battery condition using microprocessor controlled testing
methods without the need of fully charging it before test.
The unit consumes very little current during testing hence the test can be
repeated numerous times without worry of draining the battery and its
results are highly accurate.
Extremely safe as it does not create any sparks during clamp on and it
takes less than 8 seconds to obtain the full analysed results of the
battery being tested.
2. Starter Test:
Checks the cranking effectiveness of the battery to predict when the
battery will fail to crank a vehicle basing on voltage profiles with results
and recommendations display.
3. Charging Test:
This test checks the alternator charging condition during electrical
loading at 2,000 RPM and without load at 3,000 RPM. It also measured
the diode ripple voltage during the test with results and recommendations
displayed after each test.
4. Grounding Test:
Analyses the condition of the electrical return circuit contacts resistance
which was connected to the engine or chassis body from the battery
terminal with results and recommendations displayed after testing.
