___________________________________________________________________________________
‐
37
‐
12‐1015 rev‐B
User’s Manual Version 14.12
3. Follow the instructions given, transfer the BLACK tester clip from the
battery [-] terminal to a suitable position on the engine or chassis body
leaving the RED clip still attached to the battery [+] terminal.
4. After it has done, press
key to continue (Fig. 64).
5. The Analyser will start to measure (Fig.65).
6. Once it has finished analysing, it will prompt you with an instruction (Fig. 66)
stating that you have should unclamp the Black tester clip from the engine
or chassis body and transfer to the battery negative [-] terminal within 15
seconds time limit if not the testing procedure has to be repeated again as
the gathered data will be lost.
Analysing...
Please wait!
Grounding Test
Now transfer the Black
clip to the battery
[-] post.
The time limit given
is 15 seconds before
the memory is lost.
Fig.65
Fig.66
Grounding Test
[Enter] to proceed
Fig.64
