Associated Research 3030D, Operation And Service Manual, Page: 7 / 43

SAFETY
3
SERVICE AND MAINTENANCE
User Service
To prevent electric shock do not remove the instrument cover. There are no user
serviceable parts inside. Routine maintenance or cleaning of internal parts is not
necessary. Any external cleaning should be done with a clean dry or slightly damp cloth.
Avoid the use of cleaning agents or chemicals to prevent any foreign liquid from entering
the cabinet through ventilation holes or damaging controls and switches, also some
chemicals may damage plastic parts or lettering. Schematics, when provided, are for
reference only. Any replacement cables and high voltage components should be acquired
directly from Associated Research, Inc. Refer servicing to an Associated Research, Inc.
authorized service center.
ASSOCIATED RESEARCH, INC.
13860 WEST LAUREL DRIVE
LAKE FOREST, IL 60045-4546 U.S.A.
!
PHONE: 1 (847) 367-4077
1 (800) 858-TEST (8378)
FAX: 1 (847) 367-4080
E-MAIL :
info@asresearch.com
www.asresearch.com
Service Interval
The instrument and its power cord, test leads, and accessories must be returned at least
once a year to an Associated Research authorized service center for calibration and
inspection of safety related components. Associated Research will not be held liable for
injuries suffered if the instrument is not returned for its annual safety check and
maintained properly.
User Modifications
Unauthorized user modifications will void your warranty. Associated Research will not
be responsible for any injuries sustained due to unauthorized equipment modifications or
use of parts not specified by Associated Research. Instruments returned to Associated
Research with unsafe modifications will be returned to their original operating condition
at your expense.
TEST STATION
Location
Select an area away from the main stream of activity which employees do not walk
through in performing their normal duties. If this is not practical because of production
line flow, then the area should be roped off and marked for
TESTING . No employees
other than the test operators should be allowed inside.
If benches are placed back-to-back, be especially careful about the use of the bench
opposite the test station. Signs should be posted:
"DANGER - TEST IN PROGRESS -
UNAUTHORIZED PERSONNEL KEEP AWAY."