Associated Research 3030D, Operation And Service Manual, Page: 16 / 43

CONTROLS
12
FRONT PANEL CONTROLS
1 2 3 4 5
6 7 8 9 10 11 12
1. RESET SWITCH: This is a momentary contact switch. To reset the system for the
next test, press and release the red Reset switch (1). This switch may also be used to
abort a Test in Progress.
2. TEST SWITCH: This is a momentary contact switch. Press the green switch to turn
on the high current output when in the test mode.
3. LCD DISPLAY: The Liquid Crystal Display is the main readout for the operator
and programmer of the test settings and test results.
4. TEST LED INDICATOR: This red LED lights to indicate to the operator that a test
is in process.
5. INTERCONNECT JACK: For the connection of the return lead from the hipot
tester used when performing both Hipot and Ground Bond tests on the same test
item.
6. POWER SWITCH: Rocker-style switch with international ON (l) and OFF (0)
markings.
7. SET KEY: Use this key to advance forward through the setup menus.
8. DOWN ARROW (
∨
∨∨
∨
) :
Use this key to decrement numeric values in the setup mode.
This key may also be used to toggle ON/OFF functions.
9. UP ARROW (
∧
∧∧
∧
)
: Use this key to increment numeric values in the setup mode. This
key may also be used to toggle ON/OFF functions.