Associated Research 3030D, Operation And Service Manual, Page: 14 / 43

SPECIFICATIONS
10
KEY FEATURES & BENEFITS OF HYAMP jr.
1. All parameters for the setups can be adjusted through a simple menu driven program
by using front panel keys.
The easy to follow setup screens ensure that the operator correctly sets up all test
parameters.
2. Tamper proof front panel controls.
This makes it possible to limit user access to the setup screens.
3. Milliohm offset capability.
The milliohm offset function allows the use of longer test leads and test fixtures
without compromising the test results.
4. Storage of up to 5 different test programs.
A real benefit for manufacturers that test different products. This makes it possible to
store all the various test parameters required and quickly recall them for each of the
different products that needs to be tested.
5. Versatile PLC control.
Interconnection of the HYAMP jr. and the Hypot II makes these two instruments a true
semi-automated test system. The test system can be configured to test Ground Bond
first and then advance to the Dielectric Withstand test and Insulation Resistance tests.
6. Line and load regulation.
This system maintains the output voltage to within 1% from no load to full load and
over the line voltage range to ensure that test results remain consistent and within
safety agency requirements.
7. User selectable output voltage frequencies of 50 or 60 hertz.
HYAMP jr. was designed for the global market. This feature makes it simple for the
user to select the output frequency in the Ground Bond mode so that products can be
tested at the same frequency they will be used at.
8. Adjustable output current and milliohm trip ranges.
This capability makes the HYAMP jr. versatile enough to meet all safety agency
specifications for ground bond test requirements.
9. Front panel LCD displays test parameters and results.
A front panel LCD allows the operator to monitor the test. The display holds the
results after a test item failure so that the operator can easily review the test results.
10. PLC remote inputs and outputs.
The standard 9 pin interfaces provide outputs for Pass, Fail, and Test in Process,
Start Out and Reset Out. Inputs include Test, Reset, and Withstand Processing.