AsGa LightBolt 28304-E1, User Manual

Page: 88 / 100

AsGa Light AsGa Light AsGa Light AsGa LightBOLT BOLT BOLT BOLT 10GigE Switch 10GigE Switch 10GigE Switch 10GigE Switch
U U U User Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration
88
Command Mode
Exec mode
Usage
snmp-server engineID local
engine-string
snmp-server engineID remote
ip-address engine-string
Examples
LightBOLT(config)# snmp-server engineID local SYTEM
LightBOLT(config)# snmp-server engineID remote 192.168.1.1 SYSTEM
Related Commands
no snmp-server engineID (local | remote
ip-address
)
show snmp engineID ( local | remote )
5.1.43 snmp-server user create
Use this command to define the users under SNMP V3 mode.
Command Syntax
snmp-server users create
username
auth
( md5 | sha ) auth-password (
priv
priv-
password | )
snmp-server
Configure parameters to SNMP Agent
users
Users configurations
create
Create a new user
username
Name of the user on the host that connects to the agent
auth
Which authentication level should be used
md5 HMAC-MD5-96 authentication level
sha HMAC-SHA-96 authentication level
auth-password
Specifies th authentication user password
priv
Use of the User-based Security Model
priv-password
Specifies the privacy user password
Command Mode
Exec
Usage
Examples
LightBOLT(config)#
Related Commands
show snmp users
no snmp-server user ( access ( ro | rw ) | base )
username