AsGa Light
AsGa Light
AsGa Light
AsGa LightBOLT
BOLT
BOLT
BOLT 10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
U
U
U
User Guide
ser Guide
ser Guide
ser Guide
Configuration
Configuration
Configuration
Configuration
71
Examples
AsGOS# configure terminal
AsGOS(config)# interface ge2
AsGOS(interface)# switchport mode trunk
Related Commands
Switchport
5.1.18 switchport access
Use the switchport access interface configuration command to configure a port as a static-
access If the mode is set to access, the port operates as a member of the configured virtual LAN
(VLAN). Use the no form of this command to reset the access mode to the default VLAN for the
switch.
Command Syntax
switchport access { vlan <vlan-id> | vlan-staking}
vlan ID:
Per port VLAN ID configured for this port. Range 2:4093.
Vlan-staking:
use this command to enable vlan staking on a particular port (Q in Q method). All
frames will be tagged on top of the existing tag (Customer Tag) with the VLAN ID configured under
this port. Port must be an access port in order to enable vlan staking on it.
Command Mode
Configure mode
interface mode
Default
No default.
Examples
AsGOS# configure terminal
AsGOS(config)# interface ge2
AsGOS(interface)# switchport access vlan 200
AsGOS(interface)#switchport access vlan-staking
Related Commands
vlandatabase
VLAN
Switchport mode
5.1.19 switchport trunk
Use the switchport trunk interface configuration command to set the trunk characteristics
when the interface is in trunking mode. Use the no form of this command to reset all of the trunking
characteristics to the defaults. Use the no form with keywords to reset that characteristic to the
defaults. The encapsulation method for AsGa switches is based on 802.1Q tagging.
