AsGa Light
AsGa Light
AsGa Light
AsGa LightBOLT
BOLT
BOLT
BOLT 10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
U
U
U
User Guide
ser Guide
ser Guide
ser Guide
Configuration
Configuration
Configuration
Configuration
30
RFC NUMBER TITLE
2571
An Architecture for Describing SNMP Management Frameworks.
2572
Message Processing and Dispatching for the Simple Network Management Protocol (SNMP).
2573
SNMPv3 Applications.
2574
User-Based Security Model for SNMPv3.
2575
View-Based Access Control Model (VACM) for SNMP.
Tabela 3.1: SNMPv3 RFCs.
AsGa LightBolt series switches cover all the subjects detailed into those RFC´s.
The following example shows a typical SNMP V.3 configuration for a more detailed
command description please refer to the alphabetic SNMP commands description.
COMMAND
DESCRIPTION
AsGOS#
configure terminal
Enter the
Configure
mode.
AsGOS (config)#
snmp-server users create
Dguerri
auth md5
brasil3x0
priv
naargentina
Create the user name.
AsGOs(config)#
snmp-server users access
Dguerri
ro
priv
Give the access type to the configured user.
AsGOS(config)#
snmp-server manager
192.168.1.1
traps-version
3
priv
Dguerri
Set the 192.168.1.1 as the server for receiving
traps with user Dguerri.
3.19 Port Configuration
3.19.1 Configuring specific basic physical port settings
6.2.1.1 Speed
To change the negotiated speed of the port use the following commands:
COMMAND
DESCRIPTION
AsGOS#
configure terminal
Enter the
Configure
mode.
AsGOS (config)# interface Ge1
Enter into interface configuration mode.
AsGOs(interface)#
speed <auto|10|100|1000>
You can modify the Speed to auto negotiation;
or 10Mbps or 100Mbps or 1000 Mbps.
6.2.1.2 Duplex
To change the negotiated mode of one interface use the following commands:
COMMAND
DESCRIPTION
AsGOS#
configure terminal
Enter the
Configure
mode.
AsGOS (config)# interface Ge1
Enter into interface configuration mode.
AsGOs(interface)#
duplex < half|full|auto>
You can modify the duplex mode to full or half or
auto. In 1000Mbps there is no duplex mode.
