AsGa Light
AsGa Light
AsGa Light
AsGa LightBOLT
BOLT
BOLT
BOLT 10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
U
U
U
User Guide
ser Guide
ser Guide
ser Guide
Configuration
Configuration
Configuration
Configuration
53
Default
The default max-hops in a MST region are 20.
Usage
Specifying the max hops for a BPDU prevents the messages from looping indefinitely in the network.
When a bridge receives a MST BPDU that has exceeded the allowed max-hops, it discards the
BPDU.
Examples
AsGOS# configure terminal
AsGOS(config)# bridge 3 max-hops 25
4.4.5 bridge multiple-spanning-tree enable
Use this command to enable the Multiple Spanning Tree Protocol on a bridge. Use the
no
parameter
to disable the command.
Command Syntax
(no) bridge <1-32> multiple-spanning-tree enable
<1-32> Specify the bridge-group ID.
Command Mode
Configure mode
Default
There is no default value.
Example
AsGOS# configure terminal
AsGOS(config)# bridge 2 multiple spanning-tree enable
4.4.6 bridge region
Use this command to create an MST region, and specify a name to it. MST bridges of a
region form different spanning trees for different VLANs.
Command Syntax
bridge <1-32> region REGION_NAME
no bridge <1-32> region REGION_NAME
<1-32>
Specify the bridge-group ID.
REGION_NAME
Specify the name of the region.
Command Mode
MST Configuration mode
