AsGa Light
AsGa Light
AsGa Light
AsGa LightBOLT
BOLT
BOLT
BOLT 10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
U
U
U
User Guide
ser Guide
ser Guide
ser Guide
Configuration
Configuration
Configuration
Configuration
11
3.4
Command Line Help
The AsGOS CLI contains a text-based help facility. Access this help by typing in the full or
partial command string then typing “?”. The AsGOS CLI displays the command keywords or
parameters plus a short description.
Note:
Many of our command examples showed here are base on features that will be released. All of
them must be taken as typographic examples only.
For example, at the CLI command prompt, type “show ?” (the CLI does not display the question
mark). The CLI displays this keyword list with short descriptions for each keyword:
bgpd# show
debugging
Debugging functions (see also 'undebug')
history
Display the session command history
ip
IP information
memory
Memory statistics
route-map
route-map information
running-config
running configuration
startup-config
Contents of startup configuration
version
Displays
AsGOS
version
3.5
Syntax Help
The AsGOS CLI can complete the spelling of command or parameter keywords. Begin typing the
command or parameter then press TAB. At the CLI command prompt type sh:
AsGOS> sh
Press TAB. The CLI shows:
AsGOS> show
If the command or parameter partial spelling is ambiguous, the AsGOS CLI displays the choices that
match the abbreviation. Type show i. Press TAB. The CLI shows:
AsGOS> show i
interface ip
AsGOS> show i
The interface displays the interface and ip keywords. Type n to select interface and press TAB. The
CLI shows:
AsGOS> show in
AsGOS> show interface
Type ? and the CLI shows the list of parameters for the show interface command.
[IFNAME] Interface name
AsGOS> show interface
This command has but one positional parameter, an interface name. Supply a value for the IFNAME
parameter.
