AsGa Light
AsGa Light
AsGa Light
AsGa LightBOLT
BOLT
BOLT
BOLT 10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
U
U
U
User Guide
ser Guide
ser Guide
ser Guide
Configuration
Configuration
Configuration
Configuration
40
Examples
AsGOS# configure terminal
AsGOS(config)# bridge max-age 12
4.1.4 bridge priority
Use this command to set bridge priority for the common instance. Using a lower priority
indicates a greater likelihood of the bridge becoming root.
Command Syntax
bridge priority PRIORITY
PRIORITY = <0-61440>
The bridge priority.
Command Mode
Configure mode
Default
The default priority is 32678 (or hex 0x8000).
Usage
This command must be used to set the priority of the bridge.
The priority values can be set only in
increments of 4094.
Examples
AsGOS# configure terminal
AsGOS(config)# bridge priority 200
4.1.5 bridge spanning-tree errdisable-timeout enable
Use this command to enable the errdisable-timeout facility, which sets a timeout for ports
that are disabled due to the BPDU guard feature.
Command Syntax
bridge spanning-tree errdisable-timeout enable
Default
By default, the port is enabled after 300 seconds.
Command Mode
Configure mode
