TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
78
13.4 My Groups
Note:
"My Groups" are created from the NetPage and are not to be mistaken for the
groups created from the Configuration page in UPAC.
"My Groups" are stored locally and can only be accessed or changed from the PC where
they are stored.
There is a limited storage area. This means that, for groups with approximately 20
characters (name and Call ID), the following applies:
13.4.1 Create Groups
1
Click "My groups" button in
NetPage
.
2
Click "Add group".
3
Enter a name for the group in the
Name
text field.
4
Click the "To" button and select users (from the phonebook) to be members of this
group or enter number in the
Call ID
text field and click "Add".
5
Click "Save".
6
Click "Close" to exit the administration.
13.4.2 Editing Groups
1
Click "My groups" button in
NetPage
.
2
Select the groups that should be changed and the administration field will open.
3
Make changes and click "Save".
4
Click "Close" to exit the administration.
Amount of Groups
Group Members
10
19
15 7
20
2
