TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
53
Sending Messages
•
First Persistent Fault
- Click “Add Message” in the
Action on First Persistent Faults
section to send a
message for the first persistent fault. Refer to
- Click “Add E-mail” if an e-mail notification should be sent. Refer to
- Click “Add SNMP trap” to send a SNMP trap. Refer to
51.
• No Remaining Faults
- Click “Add Message” in the
Action on No Remaining Persistent Faults
section to
send a message when all persistent faults are resolved. Refer to
- Click “Add E-mail” if an e-mail notification should be sent. Refer to
- Click “Add SNMP trap” to send a SNMP trap. Refer to
51.
10.3 Activity Logging
To be able to view activities stored in the UPAC, it is also necessary to install the Java
Runtime Environment to run the Activity Log Viewer. To find this, go to www.java.com.
Functions in the Activity Log:
Figure 68.
Figure 69.
