TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
42
Changing Supervision Settings
1
Click “Setup” to set up supervision parameters for the equipment.
2
Enter a descriptive text in the
Equipment
field. Equipment is shown as Module in
the Status Log.
3
Change IP address or host name if the address of the equipment has changed.
4
Select if the equipment should be supervised or not.
5
Enter the time between supervision requests.
6
Select fault level from the drop-down list to use in the transmitted Status Log.
7
Enter a description of the event.
8
Click “Save”.
Removing IP Equipment
Remove IP equipment by clicking the “Delete” symbol. A dialogue window opens, click
“OK” to remove the IP equipment.
Figure 57.
