manualshive.com logo in svg

Asante IntraCore 3624, User Manual

Share
Download
Asante IntraCore 3624 User Manual Download Page 65

 

The table below lists the traditional classes and ranges of IP addresses and their status. 

Class

 

Address or Range

 

Status

 

A 0.0.0.0 

1.0.0.0 to 126.0.0.0 
127.0.0.0 

Reserved 
Available 
Reserved 

B 

128.0.0.0 to 191.0.0.0 
255.255.255.0 

Available 
 

C 

192.0.0.0 to  
223.255.255.0 

Available 
 

D 

224.0.0.0 to 239.255.255.255 

Multicast group addresses 

E 

240.0.0.0 to 255.255.255.254 
255.255.255.255 

Reserved 
Broadcast 

 
When multiple networks are connected to the Internet the traditional classified addressing scheme could cause you to 
run out of IP addresses. 

The usual way of assigning IP addresses uses the prefixes of 8, 16, or 24 bits. Using prefixes of 13 to 27 bits an 
address includes the standard 32-bit IP address and adds information on how many bits are used for the network 
prefix. In the IP address 206.203.1.35/27, the “/27” indicates that the first 27 bits are used to identify the unique 
network, and the remaining bits are used to identify the specific host. 

65 

Asante IntraCore IC3624/48

 

User’s Manual

 

 

Summary of Contents for IntraCore 3624


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands