manualshive.com logo in svg

Asante IntraCore 3624, User Manual

Share
Download
Asante IntraCore 3624 User Manual Download Page 32

 

sequence to recall successively more recent commands.

 

 

 

4.6 Using Command-Line Editing Features and Shortcuts 

A variety of shortcuts and editing features are enabled for the CLI command-line interface. The following subsections 
describe these features: 

 

•

 

Moving Around on the Command Line 

•

 

Completing a Partial Command Name 

•

 

Editing Command Lines that Wrap 

•

 Deleting 

Entries 

•

 

Scrolling Down a Line or a Screen 

•

 

Redisplaying the Current Command Line 

•

 

Transposing Mistyped Characters 

•

 Controlling 

Capitalization 

 

4.6.1 Moving Around on the Command Line 

Use the following keystrokes to move the cursor around on the command line in order to make corrections or 
changes: 

 

Keystrokes Purpose 

Press the left arrow.

 

Move the cursor back one character.

 

Press the right arrow.

 

Move the cursor forward one character.

 

 
Note:

 The arrow keys function only on ANSI-compatible terminals such as VT100s. 

32 

Asante IntraCore IC3624/48

 

User’s Manual

 

 

Summary of Contents for IntraCore 3624


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands