Aruba Networks AirOS v2.3, User Manual

Page: 74 / 254

64 Aruba AirOS Part 0500036-02
v2.3 User Guide January 2005
5 After entering the values as explained above, click
Apply
to apply this configura-
tion.
N
OTE
— The role will not be created until the configuration is applied.
4. Bandwidth contract A bandwidth contract can be
assigned to a user role to provide
an upper limit to the bandwidth
utilized by users in this user role.
As an example, the administrator
may want to cap the total
bandwidth used by the guest
users in a network to 2Mbps.
If the per-user option is selected,
the bandwidth contracts are
applied on a per-user basis as
compared to all users in the role.
To create a new bandwidth contract,
select the
“Add New” option. Enter
the name of the bandwidth contract
and the bandwidth to be allowed (in
kbps or mbps). Click Done to add
the new contract and assign it to the
role.
5. VPN Dialer This assigns a VPN dialer to a
user role. For details about VPN
dialer, refer to the “Configuring
VPNs” section. Select a dialer from the drop-down
list and assign it to the user role.
This dialer will be available for
download when a user logs in using
Captive Portal and is assigned this
role.
6.
L2TP Pool This assigns a L2TP pool to the
user role. For more details about
L2TP pools, refer to the
“Configuring VPNs” section. Select the required L2TP pool from
the list to assign to the user role. The
inner IP addresses of VPN tunnels
using L2TP will be assigned from
this pool of IP addresses for users in
this user role.
7. PPTP Pool This assigns a PPTP pool to the
user role. For more details about
PPTP pools, refer to the
“Configuring VPNs” section. Select the required PPTP pool from
the list to assign to the user role. The
inner IP addresses of VPN tunnels
using PPTP will be assigned from
this pool of IP addresses for users in
this user role.