Aruba Networks AirOS v2.3, User Manual

Page: 185 / 254

System and Network Management 175
Chapter 11
3 If the administrator is using SNMPv3 for getting the values from the Aruba WLAN
Switch, follow the steps below to configure valid users for SNMPv3.
6. Trap receivers Host information about a
trap receiver. This host
needs to be running a trap
receiver to receive and
interpret the traps sent by
the Aruba Access Points Configure the following for
each host/trap receiver:
z
IP address
z
SNMP version: can be 1 or
2c.
z
Community string
UDP port on which the trap
receiver is listening for traps.
The default is the UDP port
number 162. This is
OPTIONAL, and will use the
default port number if not
modified by the user.
Field Description
Expected/recommended
Values
1. User name A string representing the
name of the user. A string value for the user
name.
2. Authentication protocol An indication of
whether messages sent
on behalf of this user
can be authenticated,
and if so, the type of
authentication protocol
which is used.
This can take one of the
two values:
z
MD5: HMAC-MD5-96
Digest Authentication
Protocol.
z
SHA: HMAC-SHA-96
Digest Authentication
Protocol.