Aruba Networks AirOS v2.3, User Manual

Page: 175 / 254

Intrusion Detection 165
Chapter 10
Configuring Weak WEP detection: To configure detection of weak WEP implementations,
navigate to
Configuration > WLAN Intrusion Detection > Policies > Weak WEP
, as
shown in the figure below.
Select the option to “Detect APs and Clients Using Weak WEP IV” to enable this feature.
Configuring Multi-Tenancy detection: To configure multi-tenancy policies, navigate to
Configuration > WLAN Intrusion Detection > Policies > Multi Tenancy
, as shown in the
figure below.
8. Valid Access Point Manufacturers
OUI List
(OUIs must be entered in
the format xx:xx:xx:xx:xx:xx
where x
is a hexadecimal number, f being
the wildcard) A list of MAC address OUIs that define valid AP
manufacturers. Any valid AP with a differing OUI will
be flagged as misconfigured.