Aruba Networks AirOS v2.3, User Manual

Page: 32 / 254

22 Aruba AirOS Part 0500036-02
v2.3 User Guide January 2005
4 Configure the values in the respective fields as shown in the table above and click
Add
to enter the values.
5 Click
Apply
to apply the configuration and add the VRRP instance.
IP Address This is the Virtual IP address
that will be owned by the
elected VRRP
master.
Configure this with the Virtual IP
address reserved in step i.
Enable Router
Pre-emption Selecting this option means that
a switch can take over the role
of
master if it detects a lower
priority switch currently acting
as
master
For this topology it is
recommended NOT to select this
option.
Priority Priority level of the VRRP
instance for the switch. This
value is used in the election
mechanism for the
master
It is recommended to leave this as
the default for this
topology.(default = 100).
Admin State
Administrative state of the
VRRP instance To start the VRRP instance,
change the admin state to UP.
VLAN VLAN on which the VRRP
protocol will run. Configure this to be the VLAN ID
from step i.