Aruba Networks AirOS v2.3, User Manual

Page: 238 / 254

228 Aruba AirOS Part 0500036-02
v2.3 User Guide January 2005
10 To enable the APs to accept associations from clients, configure the Max Clients value on
the
WLAN > Radio > 802.11b/g
page. (Configure the same on 802.11a page if you are also
using 802.11a clients).
F
IGURE
15-7 Configuring Radios
11 Apply this configuration to enable Access Points to accept associations.
12 For the RADIUS server configuration, the client IP address is the interface IP address of
the interface that connects the Aruba WLAN Switch to the RADIUS server.
In this example, VLAN 14 is that interface. Therefore, the client IP address for the
RADIUS server configuration is the IP address of the VLAN 14 interface (10.200.14.6).
The NAS-IP-Address is the loopback IP address or the IP of the Aruba WLAN Switch.
In this case the value of this IP address is 10.200.14.14.
13 Configure the roles and their associated privileges for the users authenticated using 802.1x
and the guest users (authenticated by using guest logon on captive portal).
14 Create a role called
authenticated-user
on the
Configuration > Security > Role
page and configure it to have all privileges by adding the pre-defined policy called
allowall
to the list of policies for this role.