Aruba Networks AirOS v2.3, User Manual

Page: 139 / 254

Configuring Virtual Private Networks 129
Chapter 9
4 To add multiple auth servers repeat steps above for each server.
5 The servers appear in the order of descending priority. The first entry is always the pri-
mary server. To change the order, use the
S
or
T
to the right on the entry to move it
higher up or lower down in the list.
6 Click
Apply
to apply the configuration changes made before navigating to other pages to
avoid losing the changes made.
7 Click
Save Configuration
to save the configuration between reboots.
Configuring VPN with L2TP IPSec
The following pre-requisites must be configured:
1 The steps in the “Enabling VPN Authentication” must be completed along with the
L2TP IPSec configuration to enable VPN.
2 Enable VPN Authentication as mentioned in the previous section.
3 Navigate to the
Configuration > Security > VPN Settings > IPSEC
page.